WiFi Reset Guide-ENG

WiFi Reset Operation Guide

Two independent methods available - choose either one.

Method A: Button Reset
1️. Power cycle: Turn off the printer, wait 10 seconds, then reconnect power;
2️. Locate button: After self-test completes, find the “WiFi Reset” button on the mainboard;
3️. Activate reset: Rapidly press 5 times (about 3 presses/second rhythm) until blue indicator enters flash mode, indicating hotspot reactivation;
4️. Connect device: Access WiFi settings on your phone, select “Printer-XXXX” network to complete configuration.


Method B: Cover Opening Reset
★ Critical: Only works on first opening attempt after each power-on!
1️. Full reset: Unplug power cable for 15 seconds before reconnecting;
2️. Timed opening: Immediately open toner cover after self-test (open angle >45°);
3️. Hold position: Maintain open state for 10 seconds until blue flash activates hotspot;
4️. Pair device: Select “Printer-XXXX” in phone’s WiFi list to finalize setup.

Note

  1. Within the printer’s network configuration interface, select the “RINGRI LOGO” positioned at the footer section of the web administration page to initiate network settings restoration.